HOW TO USE THE FAX FUNCTION
4-15
Transmission Reservation
When your fax is busy receiving a document or transmitting a document from memory,
you can “reserve” a transmission by setting the document (either in the ADF or on the
original table), reading it into memory, and entering the fax number. Once the current
operation is completed, your fax will automatically dial the number and transmit the
document saving you from having to wait.
When Using the ADF:
1
Confirm that there are no
documents on the original table
and that copying is not in progress,
then gently close the original cover.
2
Adjust the document guides to the
width of your document.
3
Place the document face up and
push it gently into the ADF. The top
edge of the document should enter
the fax first.
• Adjust the resolution and/or contrast
settings if desired. Note however that
you cannot use the HALF TONE
resolution setting with B4 size
documents.
4
Enter the number of the receiving
machine using one of the following
methods:
• Press a Rapid key.
• Press the SPEED/SEARCH key and
enter a Speed Dial number.
• Enter a full number with the number
keys.
5
Press the FAX START key if you
entered a Speed Dial number or a
full number
• The number will be dialed once the
current operation is completed, and
transmission will begin once the
connection is made.
(example)
SPEED/SEARCH
Special Functions
Original face up
Summary of Contents for e-studio15
