manualshive.com logo in svg

Toshiba e-STUDIO 5530C Pro, Operating Instructions Manual, Page: 96 / 276

Share
Download
Toshiba e-STUDIO 5530C Pro Operating Instructions Manual Download Page 96

3.

Place the originals, and then press the [Start] key.

• You can specify the fold-back position in 1 mm (0.1 inch) increments under Z-fold Position in User

Tools. For details about Z-fold Position, see “System Settings”, General Settings Guide.

• For details about the standard paper sizes that can be Z-folded, and the number of Z-folded copies

that can be stacked on each tray, see “Supplementary Information”.

• p.248 "Supplementary Information"

Using the Z-fold support tray

When using the Z-fold function together with the Staple function, attach the Z-fold support tray to the tray
of Finisher SR4020 or SR5000.

Finisher SR5000

• Shift tray

Fit the hooks of the Z-fold support tray into the holes in the shift tray.

BAS011S

Finisher SR4020

• Upper tray

Fit the hooks of the Z-fold support tray into the dents in the upper tray.

2. Basic Copying

94

2

Summary of Contents for e-STUDIO 5530C Pro





















































































































































































































































































Reviews:

No comments