manualshive.com logo in svg

Toshiba e-STUDIO 5530C Pro, Operating Instructions Manual, Page: 117 / 276

Share
Download
Toshiba e-STUDIO 5530C Pro Operating Instructions Manual Download Page 117

• p.3 "What You Can Do with This Machine <Color Functions/Color Adjustments>"

Color Balance Program

You can store the color balance setting as a color balance program and recall it when you want to use it.
You can store up to three programs.

• If you want to change the registered settings, register them one more time. In this case, the previously

registered settings will be overwritten.

Registering the adjusted color balance

Register adjusted color balance settings so that you can use them later.

1.

Adjust the color balance.

2.

Press [Program Color Balance].

3.

Press [Program].

4.

Select a program number (1-3).

The color balance setting will be registered in the selected number.

5.

Press [OK] twice.

• If you select the program number key where   is displayed, the previously registered settings will be

overwritten.

• For details about how to adjust the color balance, see “Color Balance”.

• p.114 "Color Balance"

Adjusting Color and Image Quality

115

3

Summary of Contents for e-STUDIO 5530C Pro





















































































































































































































































































Reviews:

No comments