xiv
Introduction
• Chapter 4 describes how to use the Imposition feature of DocBuilder Pro
™
to
arrange the pages of your print job in special layouts for folding, binding, or cutting
after printing. The Imposition feature is only available if you have the DocBuilder
Pro option for Command WorkStation installed.
• Chapter 5 provides instructions on using the advanced aspects of the Imposition
feature of DocBuilder Pro to create custom layouts and get the most from the
Imposition feature.
• Chapter 6 introduces TopAccess and Fiery WebTools
™
, explains how to access them,
and directs you to sources of more information (in this manual or in other manuals
in the documentation set).
• Chapter 7 describes Fiery WebSpooler
™
which can be used to view and manage
GA-1040 job activity. The interface and features of Fiery WebSpooler have identical
counterparts in the Command WorkStation; therefore, this chapter refers you to
Chapters 1 and 2 for details about many Fiery WebSpooler functions.
• Appendix A provides an overview of the terms and concepts of Imposition,
including various folding, binding, and cutting methods.
• Appendix B includes descriptions of the built-in templates available from the
Imposition feature of DocBuilder Pro.
• Appendix C lists error messages you might see on the GA-1040 Control Panel, the
FieryBar
™
, the Command WorkStation, Fiery WebSpooler, Fiery Spooler, or the
copier, and contains troubleshooting information.
Conventions
The following icons are used in this manual:
Indicates features and functionality for which the PostScript option is required.
Indicates features and functionality which requires a hard disk drive.
