December 2000 © TOSHIBA TEC
2 - 25
1600/2000/2500 OUTLINE OF THE MACHINE
[M] Left cover R
1. If a Finisher (MJ-1011) is attached to the copier,
detach it.
2. Remove 3 screws holding the paper tray cover.
(See Fig. 2-6-11)
3. Detach left cover. (See Fig. 2-6-13)
4. Remove one screw holding the top cover L.
5. Remove 3 screws, release one hook, and de-
tach left cover R.
Fig. 2-6-14
Fig. 2-6-15
Left cover R
Screw
Right cover R
Screw
Screw
Side cover
012
013
Screw
Top cover L
Hook
01/05
Fig.2-6-15-1
Screw
Screw
Upper right cover R
Lower right cover R
Side cover
013-3
[N-2] Upper right cover R/Lower right cover R
In case that an ADU and SFB are not attached
or a SFB is attached.
1. Open side cover.
2. Remove 2 screws and detach upper right cover
R.
3. If a SFB (MY-1016) is attached to the copier,
detach it.
4. Remove 2 screws and detach lower right cover
R.
In case that an ADU is attached or an ADU and
SFB are attached.
1. Open an ADU (MD-0101) and release the wire.
2. Open side cover.
3. Remove 2 screws and detach upper right cover
R.
4. Detach an ADU (MD-0101) from the copier.
5. If a SFB (MY-1016) is attached to the copier,
detach it.
6. Remove 2 screws and detach lower right cover
R.
[N-1] Right cover R
1. If an ADU (MD-0101) and/or SFB (MY-1016)
are attached to the copier, detach it.
2. Pull release lever and open side cover.
3. Remove 3 screws and detach right cover R.
Summary of Contents for DP1600
