Toshiba DP1600, Service Manual

Page: 64 / 264

December 2000 © TOSHIBA TEC 3 - 15 1600/2000/2500 COPYING PROCESS
01/11
Fig. 3-4-18
5. Clean the developer materials remaining on the
surface of the magnetic roller inside of the de-
veloper assembly by a vacuum cleaner.
Notes: 1. Be careful not to damage the surface of
the magnetic roller.
2. Be careful so that the vacuum cleaner
does not touch the toner empty sensor.
3. Be careful not to damage the mylar for
stirring.
6. Fill with new developer material.
7. Shake the developer assembly from right to left
several times to flatten the developer material.
8. Rotate the gear several times until the devel-
oper is supplied to the magnetic roller.
Fig. 3-4-19
9. Attach the developer cover.
[H] Main charger wire cleaning pad
1. Remove the toner cartridge and the process
unit.
2. Detach the drum assembly. (See Fig. 3-4-2.)
3. Detach the DLE PWA assembly. (See Fig. 3-4-
3.)
4. Detach the main charger assembly. (See Fig.
3-4-4.)
5. Detach the main charger wire. (See Fig. 3-4-6.)
6. Detach the main charger wire cleaning pad from
the main charger wire cleaning lever.
Fig. 3-4-20
Developer material
Developer assembly
3-4-18
1
2
Developer assembly
Magnetic roller
Gear
3-4-19
Main charger wire
cleaning lever
Main charger wire
cleaning pad
Main charger wire
cleaning pad
3-4-20