December 2000 © TOSHIBA TEC
14 - 11
1600/2000/2500 FUSER UNIT/PAPER EXIT UNIT
Fig. 14-7-3
Fig. 14-7-4
Screw
Screw
Fuser front cover
Fuser front cover
087-1
087-2
[C-1] Heat roller separator/fuser front cover (screw type)
1. Remove fuser unit. (See Fig. 14-7-1)
2. Remove 2 screws and open fuser front cover.
3. Remove the fuser front cover.
02/01
Fig. 14-7-2
Screw
Screw
Hook
Heater
thermistor
086
Hook
[B] Heater thermistor
1. Remove fuser unit. (See Fig. 14-7-1)
2. Detach 2 screws, release 6 hooks, and remove
heater thermistor.
Notes:
1. Never touch or bend the tip of the heater
thermistor.
2. When attaching the heater thermistor, its
tip should contact with the heater roller.
Also, attach the heater thermistor with
no slack.
Heater
thermistor
Heat roller
Screw
Summary of Contents for DP1600
