December 2000 © TOSHIBA TEC
14 - 13
1600/2000/2500 FUSER UNIT/PAPER EXIT UNIT
5. Remove the heat roller separator.
(See Fig. 14-7-5 and 14-7-5-2)
6. Remove one screw and detach the spring plate,
or detach one screw.
Fig. 14-7-8
Screw
Spring plate
089-2
02/01
Fig. 14-7-8-1
089-3
Screw
Fig. 14-7-7
Screw
Housing assembly
089-1
Screw
[E] Fuser thermofuse/fuser front cover (knob type)
(DP1600 series)
1. Remove fuser unit. (See Fig. 14-7-1)
2. Remove heater thermistor. (See Fig. 14-7-2)
3. Remove 2 screws and detach the housing as-
sembly.
4. Loosen 2 knobs and detach the fuser front
cover.
Fig.14-7-7-1
089-4
Fuser front cover
Knob
Summary of Contents for DP1600
