Toshiba DKT3210-SD - Digital Phone - Charcoal User Manual Download

Page: 92 / 115

Strata CTX DKT3000/3500-Series Digital Telephone October 2002

DADM/DSS Console

This chapter provides an overview of the following two optional units and describes the features,

buttons and associated LEDs. There’s a 3000-series and 2000-series model for each of these units.

♦

Digital Add-on Module (DADM) –

adds 20 line/feature buttons to digital telephones. Up to two

DADMs can be connected to a telephone.

♦

Direct Station Selection (DSS)

Console

– adds 60 line/feature buttons to a digital telephone.

Available for system operators who do not have an Windows Operator Console.

Note

Please note these 2 models are also compatible with the DKT3500-series of handsets.

DADM

Digital add-on Modules (DADM) can be connected to both the 3000-series, 3500-series and 2000-

series telephones to provide additional buttons.The 3000-series and 3500-series telephone requires a

3000-series, 3500-series DADM; the 2000-series telephone requires a 2000-series DADM.
The DADM3020 model, is shown below, right. The DADM2020 (not shown) looks similar and has

the same functions.

Summary of Contents for DKT3210-SD - Digital Phone - Charcoal




















































































































Search results

Summary of Contents for DKT3210-SD - Digital Phone - Charcoal

Reviews:

Related manuals for DKT3210-SD - Digital Phone - Charcoal

Brands by name

Popular brands

Toshiba DKT3210-SD - Digital Phone - Charcoal, User Manual

Search results

Summary of Contents for DKT3210-SD - Digital Phone - Charcoal

Reviews:

Related manuals for DKT3210-SD - Digital Phone - Charcoal

Brands by name

Popular brands