Strata CTX DKT3000/3500-Series Digital Telephone October 2002
53
Advanced Operation
Tone/Pulse Dialling
The numbers are defined in
Table 4
:
Tone/Pulse Dialling
With some older Exchangess, you may have to make calls on outside lines programmed for rotary dial
pulses. This feature enables you, while on these lines, to switch to tone dial to access remote
equipment (such as an answering machine) requiring touchtones.
Note
With ISDN calls, when
Tone Dial Select
is pressed, all of the digits entered after that
point will be sent with touchtones.
➤
To change Tone Dialling
1. Access an outside line.
2. Dial a telephone number.
3. While on the call, press
Tone Dial Select
. Although the outside line is programmed for rotary dial
pulses, access the outside line and dial the telephone number like any other call described in this user
guide.
The Tone LED lights steady red and you are able to send touchtones with your dial pad. The feature is
cancelled when the call is completed.
Table 4
Dial String Characters
Entry
Meaning
0~9
0~9
#
End of Speed Dial Number when entering via access code (
#66)
*
Escape. “
*
” functions as an escape key indicating that the number immediately
following represents something exceptional. When
*
is used as an escape character, it
consumes one Speed Dial digit. Entering
*
7
to insert a seven-second pause would
use two of 32 characters.
*
(1 ~ 9)
Pause (1~9) seconds. If you need to pause longer than nine seconds, enter additional
pause escape sequences. For example, to insert a 17-second pause, enter
*9*8
. The
display of a pause in the Speed Dial Number shows a “P” without specifying the
duration. In this example, you would see “PP.”
**
*
*
#
#
