Toshiba DKT3210-SD - Digital Phone - Charcoal User Manual Download

Page: 65 / 115

Strata CTX DKT3000/3500-Series Digital Telephone October 2002

Speed Dial

Advanced Operation

➤

To store a Station Speed Dial Number using an Access Code

1. Dial

#66

. The display shows “SPEED DIAL” and you hear Entry Tone.

2. Dial the Station Speed Dial number (100~199). The LCD shows your digits and you hear Entry Tone.

Note

Selected telephones may have the ability to change System Speed Dial numbers. Follow this

procedure but specify a System Speed Dial number (200~999) instead.

3. Enter the destination digits, then press

. The LCD shows “SPEED DIAL” + the Speed Dial Number

+ desti #. You hear Success Tone.

4. Release the telephone. To enter another number, repeat the process, starting with

Step 1.

CTX System Administration

The third method of storing station Speed Dial numbers is via your CTX System Administrator, who

can establish your Station Speed Dial number through administrative software and associate a name

with it. This name is used by the Directory Dialling feature of DKT3014 large display telephones.

Advanced Speed Dial Operation

Special Characters

Speed Dial Numbers may include

and Pause. When using the Access Code input method

(see above) it is also necessary to use

to indicate you have finished entering the destination number.

This creates 14 functions to be input from the 12 buttons on the dial pad.

Long Speed Dial Numbers

Speed Dial Numbers are stored sequentially in memory areas capable of holding 32 digits. If you

exceed 32 digits, the excess are stored in the next higher area and consume the next sequential Speed

Dial Number.
You can dial the entire string by entering the original Speed Dial Number and all digits will be sent,

including those in excess of 32. If that were Speed Dial Number 100, Number 101 would no longer be

available. You are not prevented from storing a new Number 101 but, if you do, Number 100 will be

shortened to 32 digits.

Summary of Contents for DKT3210-SD - Digital Phone - Charcoal




















































































































Search results

Summary of Contents for DKT3210-SD - Digital Phone - Charcoal

Reviews:

Related manuals for DKT3210-SD - Digital Phone - Charcoal

Brands by name

Popular brands

Toshiba DKT3210-SD - Digital Phone - Charcoal, User Manual

Search results

Summary of Contents for DKT3210-SD - Digital Phone - Charcoal

Reviews:

Related manuals for DKT3210-SD - Digital Phone - Charcoal

Brands by name

Popular brands