Toshiba DKT3210-SD - Digital Phone - Charcoal User Manual Download

Page: 44 / 115

Strata CTX DKT3000/3500-Series Digital Telephone October 2002

Advanced Operation

Call Forward

Call Forward Settings

♦

Call Forward All Calls

– Forwards all calls immediately.

♦

Call Forward Busy/Do Not Disturb

– Forwards calls immediately when your extension is busy

or in Do Not Disturb (DND) mode.

In Tone-first systems, if your (PDN) appears on more than one button on your telephone, Call

Forward Busy forwards calls only when all (PDN) buttons are in use. In Voice-first systems, Call

Forward Busy forwards all calls any time your telephone is in use.

♦

Call Forward—No Answer

– Forwards all calls to your station whenever you do not answer the

call within a designated time (set by you when you enable the feature).

♦

Call Forward—Busy/DND/No Answer

– Forwards all calls to your station immediately

whenever you are busy, in the DND mode, or after ringing and you do not answer the call within

a designated time (set by you when you enable the feature). Your station can be programmed to

bypass Call Forward/No Answer when receiving Voice First (handsfree) calls. Callers can

activate ringing and Call Forward by dialling

during their voice announcement.

♦

On “tone-first” systems, if your [PDN] appears on more than one button on your telephone,

Call Forward Busy forwards calls only when all [PDN] buttons are in use; if there is an idle

[PDN], it flashes or rings when called.

♦

On “voice-first” systems, Call Forward Busy forwards all calls any time your telephone is in

use and/or any time all of your [PDNs] are in use by other telephones.

♦

Call Forward Cancel

– Cancels the set Call Forward feature. Notice that each category of Call

Forward has a different code for cancelling.

Summary of Contents for DKT3210-SD - Digital Phone - Charcoal




















































































































Search results

Summary of Contents for DKT3210-SD - Digital Phone - Charcoal

Reviews:

Related manuals for DKT3210-SD - Digital Phone - Charcoal

Brands by name

Popular brands

Toshiba DKT3210-SD - Digital Phone - Charcoal, User Manual

Search results

Summary of Contents for DKT3210-SD - Digital Phone - Charcoal

Reviews:

Related manuals for DKT3210-SD - Digital Phone - Charcoal

Brands by name

Popular brands