Toshiba DKT3210-SD - Digital Phone - Charcoal User Manual Download

Page: 48 / 115

Strata CTX DKT3000/3500-Series Digital Telephone October 2002

Advanced Operation

Call Park Orbits

Call Park Orbits

The Call Park feature enables you to hold a call temporarily in a location other than your telephone.

These areas are called orbits. You or another telephone user can retrieve a parked call from its orbit by

specifying the orbit number. You can specify one of 20 General Park Orbits (7000~7019) or a valid

extension number within the system.
Once you have parked a call in an orbit, you can:

♦

Hang up and retrieve the parked call at a later time

♦

Originate another call

♦

Access a voice paging device to announce the parked call for pickup from another station

If you park a call and it is not retrieved, it will recall to the parking station and one of the following

occurs:

♦

If your station is idle when the system Call Park recall timer expires, the parked call automatically

recalls to your station.

♦

If your station is busy, the parked call camps on.

If you have an LCD telephone, you can let the system automatically select an available orbit number

which displays on your LCD.

Summary of Contents for DKT3210-SD - Digital Phone - Charcoal




















































































































Search results

Summary of Contents for DKT3210-SD - Digital Phone - Charcoal

Reviews:

Related manuals for DKT3210-SD - Digital Phone - Charcoal

Brands by name

Popular brands

Toshiba DKT3210-SD - Digital Phone - Charcoal, User Manual

Search results

Summary of Contents for DKT3210-SD - Digital Phone - Charcoal

Reviews:

Related manuals for DKT3210-SD - Digital Phone - Charcoal

Brands by name

Popular brands