Toshiba BMS-CT1280E Owner'S Manual Download

Page: 44 / 82

Touch Screen Controller

Owner's Manual

-EN

Change to energy saving temperature (Eco Temperature Shift)

An energy saving function that changes (shifts) the set temperature according to the current operation mode as follows.

●

NOTE

• Displayed in the case of a compatible air conditioner.
• When the Mode is set to [Heat], [Cool], or [Dry], the settings screen is displayed.

Set the temperature change range (Set temp. range limit)

You can set the set temperature range for each operation mode.

●

NOTE

• Displayed in the case of an air conditioner. It is not displayed in the case of ON/OFF unit.
• If the current set temperature of the air conditioner is outside of the set temperature range after the change, it will be

changed to the temperature within the range after the change.

Tap the upper/lower limit temperature you want to
change

●

NOTE

• Displayed in the case of a compatible air conditioner.
• Some operation modes are not displayed depending on the model.

Tap the number, enter the temperature, and tap [

-(1)

]

Operation Mode

Set Temperature Shift Width

Cool/Dry

Current set tempe2°C shift

Heat

Current set temperature -2°C shift

Auto/Fan

Remain at current set temperature

-(1)

Summary of Contents for BMS-CT1280E



















































































Search results

Summary of Contents for BMS-CT1280E

Reviews:

Related manuals for BMS-CT1280E

Brands by name

Popular brands

Toshiba BMS-CT1280E, Owner'S Manual

Search results

Summary of Contents for BMS-CT1280E

Reviews:

Related manuals for BMS-CT1280E

Brands by name

Popular brands