Touch Screen Controller
Owner's Manual
62
-EN
Set the operation lock level (Operation lock)
1
Tap [
1
-(2)
] with [
1
-(1)
2
Enter the password and tap [
2
-(1)
]
●
NOTE
The factory default setting password is "1048".
3
Select the protection level during lock
●
NOTE
You can change the password that sets the operation lock.
Tap [
3
-(1)
] to display the change password input screen.
Enter the changed password, tap [OK], re-enter it on the re-entry screen, then
tap [OK].
4-digit passwords can be set.
4
Tap [
4
-(1)
]
Set the IP address of the Touch Screen Controller (IP Address)
1
Tap [
1
-(2)
] with [
1
-(1)
2
Tap the value you want to change
The background of the selected item changes to white.
3
Tap the numeric keypad to enter a number
4
If there are other values you want to change, repeat steps
2
and
3
5
Tap [
5
-(1)
]
The IP address is reset.
●
NOTE
• The initial setting is as follows:
IP address: 192.168.2.80
Subnet mask: 255.255.255.0
Default gateway: 0.0.0.0
• To return a changed value to the specified value, tap [(1)]. Tap [OK] on the
confirmation screen to reset the IP address.
1
-(2)
1
-(2)
1
-(1)
1
-(1)
2
-(1)
2
-(1)
3
4
-(1)
4
-(1)
3
-(1)
3
-(1)
2
1
-(2)
1
-(2)
1
-(1)
1
-(1)
5
-(1)
5
-(1)
(1)
(1)
3
