Toshiba BMS-CT1280E Owner'S Manual Download Page 73

Page: 73 / 82

Touch Screen Controller

Owner's Manual

73-

Useful information

The following cases are not faults with the Unit.

Please check the following before requesting service.

If you have investigated the above and there is still an abnormality, please contact the dealer from whom you purchased the

Unit with the part number and problem.

Under no circumstances conduct repairs by yourself. Doing so is dangerous.
Moreover, if the LCD display part of the Touch Screen Controller displays

(Abnormality) and a check code, please also

inform the dealer of these items.

Appendix

*1 Conditions for PC connection (operating environment)

OS: Windows 8.1 or Windows 10
LAN port: 10BASE-T or 100BASE-TX wired LAN port
Other: mouse/keyboard, printer (if printing is required)

Problem

Cause

When an air conditioner is stopped, its
operation status is displayed on the LCD
display part of the Touch Screen Controller.

This is because even when an air conditioner is stopped, you can set its operation from the
Touch Screen Controller.

The display does not switch even if you
operate the Touch Screen Controller.

• The function is not provided by the air conditioner.
• There may be an error in the operation method. Please check the operation

explanation of the function.

• This is because switching of HEAT and COOL in the operation mode is

prohibited.

It is not set even when operating the Touch
Screen Controller.

Problem

Cause

Solution

The air conditioner does not operate even
when I press the Run/Stop switch on the
Touch Screen Controller.

Has a power outage
occurred?

If the LCD of the Touch Screen Controller does not display,
press the ON/OFF button of the Touch Screen Controller
again after energizing the controller.

The check lamp of the Touch Screen
Controller lights up.

Is the air conditioner
protection device operating?

Please see the air conditioner operation manual and check
the operation.

On the LCD display part of the Touch Screen
Controller

(Abnormality) and the check

code C06 is displayed.

Is a power outage affecting
the air conditioner?

After restoring power to the air conditioner, the display will
disappear after waiting a few minutes.

Specifications

Detailed specifications

Power supply

220-240 V AC 50/60 Hz

Operating temperature/

humidity range

0°C to 40°C, 10% to 90% RH (no dew condensation)

Dimensions (mm)

H136×W205×D10(+80) (Embedded dimensions shown in parenthesis)

Mass

1.34 kg (Touch Screen Controller)

0.45 kg (power adapter)

LCD

Type 7 TFT liquid crystal, 800×480, 167,000 colours

(Luminance 800 cd/m

, contrast ratio 600:1)

Touch Screen

Projection-capacitive type

Communication ports

· RS-485 port ×1

(for connecting four digital I/O interfaces and four watt hour meter interfaces)

· LAN port ×1 (for connecting PC)

USB port

USB memory stick connection port ×2

External contact input

8 inputs

External contact output

4 inputs

Included PC software

(Requires a separate PC (*1))

· Remote Control Software
· Report Creation Software

· Section Changeover Software

· Data Analyzer

Summary of Contents for BMS-CT1280E



















































































Search results

Summary of Contents for BMS-CT1280E

Reviews:

Related manuals for BMS-CT1280E

Brands by name

Popular brands

Toshiba BMS-CT1280E, Owner'S Manual

Search results

Summary of Contents for BMS-CT1280E

Reviews:

Related manuals for BMS-CT1280E

Brands by name

Popular brands