Toshiba BMS-CT1280E Owner'S Manual Download

Page: 14 / 82

Touch Screen Controller

Owner's Manual

-EN

Switch

The air conditioner or ON/OFF unit switch registered in each group is displayed, and the
name is displayed below the switch.

No.

Name (Icon)

Functions

Displays the operation status of the air conditioner(s).

means operating state. The set temperature is

displayed on the left and the operation mode is displayed on the
right. Drag or flick

to the left to stop the operation.

is the stopped state. Only the set operation mode is

displayed. Drag or flick

to the right to start the operation.

Tap the overall switch to switch to the CONTROL tab on the
individual control screen. (P.17)

Displays the operating condition of the air conditioner.
Operation of the air conditioner(s) is locked. (P.50)

Alarm in progress. Tap to switch to the CONTROL tab on the
individual control screen and check the details of the alarm.
(P.19)

Operation is impossible due to power outage (hibernation state).

Displays the operation status of the ON/OFF unit.
Drag

left or right to change the operation status.

Displays the operation status of the ON/OFF unit.
The operation status cannot be changed.
The Unit is locked or output control cannot be performed.

Displayed when the FILTER Sign appears.

Displayed when the output of the air conditioner is limited.

Summary of Contents for BMS-CT1280E



















































































Search results

Summary of Contents for BMS-CT1280E

Reviews:

Related manuals for BMS-CT1280E

Brands by name

Popular brands

Toshiba BMS-CT1280E, Owner'S Manual

Search results

Summary of Contents for BMS-CT1280E

Reviews:

Related manuals for BMS-CT1280E

Brands by name

Popular brands