background image

Touch Screen Controller

Owner's Manual

40

-EN

4

To change, tap 

 to display the settings screen, then tap [OK] after changing the settings

For details on the confirmation/setting contents of each item, refer to the following. The items displayed 
depend on the model and state.

Function Name

Overview

Setting Items

Reference 

Page

Ventilation 

 ON/OFF

Controls the operation of the ventilator connected to the air to 
air heat exchanger(s) or the air conditioner(s).

ON/OFF

P.41

Ventilation 

 Mode

Controls the ventilation mode of the ventilator connected to the 
air to air heat exchanger(s) or the air conditioner(s).

Bypass/Heat exchange/
Automatic

P.41

Ventilation 

 Fan speed Controls the operation of the ventilator connected to the air to 

air heat exchanger(s) or the air conditioner(s).

High/Middle/
Supply air > Exhaust air/
Exhaust air > Supply air

P.41

Ventilation 

 Control

24-hour ventilation/Nighttime heat purge

Power Level

You can monitor the output status of the air conditioner(s).

P.42

Outdoor temp.

You can monitor the temperature inside the room detected by 
the outdoor unit.

P.42

Filter sign reset

You can clear the FILTER Sign.
You can clear the Hour.

OK/Cancel

P.42

Soft Cooling

You can set to Middle COOL.

ON/OFF

P.42

Energy saving ratio [%]

You can control the cooling/heating output of the air 
conditioner(s).

Release/Max./50/0

P.43

Forced Thermo OFF

You can release Thermo OFF.

Invalid

P.43

Return Back

You can monitor Return Back.
Return Back is set by the operation schedule.

P.43

Power peak cut

You can monitor whether the outdoor unit is controlling 
demand.

P.43

Eco Temperature Shift

You can set whether to change (shift) the set temperature.

Shift the set temperature to 
the energy saving 
temperature

P.44

Set temp. range limit

You can change the set temperature range for each operation 
mode.

18°C to 29°C

* It may differ depending 

on the region and 
model.

P.44

Summary of Contents for BMS-CT1280E



















































































Reviews: