Toshiba A215-S5837, User Manual

Page: 119 / 170

User’s Manual 8-7
A210
6. Fit the module’s connectors into the computer’s connectors at about a
45 degree angle and press the module carefully to ensure a firm
connection.
7. Push the module down so it lies flat. Latches on either side will click into
place to secure the module.
Installing a module
8. Seat the cover and secure it with screws.
9. Replace the battery pack as described in Chapter 6,
Power and Power-
Up Modes .
10. Turn the power on and make sure the added memory is recognized.
Removing Memory on Bottom Side
To remove the memory module, make sure the computer is in boot
mode then:
1. Be sure the power is off and all cables are disconnected from the
computer.
2. Turn the computer upside down and remove the battery and loosen the
screw securing the memory module socket cover.
3. Slide your fingernail or a thin object under the cover and lift it off.
Do not touch the connectors on the memory module or on the computer.
Debris on the connectors may cause memory access problems.
1
2
If you use the computer for a long time, the memory modules will become
hot. In this case, let the memory modules cool to room temperature before
you replace them.
Do not try to remove a memory module with the computer turned on.
You can damage the computer and the module.