Toshiba A215-S5837 User Manual Download Page 136

Page: 136 / 170

9-8

User’s Manual

A210

Hard disk drive

Password

i.LINK (IEEE1394a)

Problem

Procedure

Computer does not

boot from hard drive.

Insert a system disk and reboot.
There may be a problem with your operating

system files. Refer to your operating system

documentation.

Slow performance

Your files may be fragmented. Run SCANDISK

and defragmenter to check the condition of your

files and disk. Refer to your operating system

documentation or online HELP for information on

running SCANDISK and the defragmenter.
Contact your dealer if the problems continue.

Problem

Procedure

Cannot enter

password

Refer to Chapter 6,

Power and Power-Up Modes

Problem

Procedure

i.LINK device does not

function

Make sure the cable is securely connected to the

computer and to the device.
Make sure the device’s power is turned on.
Reinstall the drivers. Open the Windows Control

Panel and double-click the

Add New Hardware

icon. Follow the on-screen directions.
Restart Windows.
If problems persist, contact your dealer.

Summary of Contents for A215-S5837











































































































































































Search results

Summary of Contents for A215-S5837

Reviews:

Related manuals for A215-S5837

Brands by name

Popular brands

Toshiba A215-S5837, User Manual

Search results

Summary of Contents for A215-S5837

Reviews:

Related manuals for A215-S5837

Brands by name

Popular brands