Toshiba A215-S5837 User Manual Download Page 57

Page: 57 / 170

User’s Manual

3-9

A210

Restoring the pre-installed software

If preinstalled files are damaged, use the Product Recovery DVD-ROM to

restore them. To restore the operating system and all preinstalled software,

follow the steps below.

1. Load the Product Recovery disc in the drive and turn off the computer’s

power.

2. Switch on the computer and, when the

In Touch with Tomorrow

TOSHIBA

prompt appears, press the

F12

key to display the Boot Menu.

3. Use the up or down cursor key to select the CD-ROM/DVD drive in the

display menu.

4. Follow the on-screen instructions.
5. If your computer came with additional software installed, this software

can not be recovered from the Product Recovery DVD-ROM. Re-install

these applications (e.g. Works Suite, Games, etc.) separately from

other media.

When you reinstall the Windows operating system, the hard disk will be

reformatted and all data will be lost.

Summary of Contents for A215-S5837











































































































































































Search results

Summary of Contents for A215-S5837

Reviews:

Related manuals for A215-S5837

Brands by name

Popular brands

Toshiba A215-S5837, User Manual

Search results

Summary of Contents for A215-S5837

Reviews:

Related manuals for A215-S5837

Brands by name

Popular brands