Toshiba A215-S5837 User Manual Download Page 114

Page: 114 / 170

8-2

User’s Manual

A210

Express Card

The computer (depending on the model) is equipped with an Express Card

expansion slot that can accommodate two standard module formats; an

Express Card/34 module and an Express Card/54 module. An Express

Card module is a small, modular add-in card technology based on PCI

Express and Universal Serial Bus (USB) interfaces.

Installing an Express Card

One Express Card connector is located on the right side of the computer.

The computer’s hot-install feature lets you install Express Card while the

computer’s power is on.
To install an Express Card, follow the steps below.
1. Insert the Express Card.
2. Press gently to ensure a firm connection.

Installing an Express Card

After installing the card, refer to the card’s documentation and check the

configuration in Windows to make sure it is appropriate for your card.

Removing an Express Card

1. Click the

Safety Remove Hardware

icon on the Task Bar.

2. Click the Express Card you want to remove.
3. Press the Express Card once to extend it.
4. Grasp the extended Express Card, and remove it.

Removing an Express Card

Summary of Contents for A215-S5837











































































































































































Search results

Summary of Contents for A215-S5837

Reviews:

Related manuals for A215-S5837

Brands by name

Popular brands

Toshiba A215-S5837, User Manual

Search results

Summary of Contents for A215-S5837

Reviews:

Related manuals for A215-S5837

Brands by name

Popular brands