Toshiba A215-S5837 User Manual Download Page 115

Page: 115 / 170

User’s Manual

8-3

A210

SD/SDHC/MMC/MS/MS Pro/xD Memory cards

The computer is equipped with a multiple digital media card slot that can

accommodate SD/SDHC/MMC/MS/MS Pro/xD memory cards. These

memory cards let you easily transfer data from devices, such as digital

cameras and Personal Digital Assistants, which use flash-memory.

Card Type

Capacities

up to 2GB

SDHC

4GB

MMC

up to 1GB

up to 128MB, 256MB (128MB x 2, selectable)

MS Pro

up to 2GB

Keep foreign objects out of the memory card slot. A pin or similar object

can damage the computer’s circuitry.

Do not format a memory card with Windows

as it might result in that card

not being able to be used with some peripheral devices.

The Logo of SD memory card is

The Logo of SDHC memory card is

The card is designed so that it can be inserted only one way. Do not try to

force the card into the slot.

Memory Stick Duo/PRO Duo and the Memory Stick adaptor are not

compatible with the Multiple Digital Media Card slot. Do not insert Memory

Stick Duo/PRO Duo into the slot. Data may be lost or damaged if you use

any card other than those supported.

For more details on using memory cards, see manuals accompanying the

cards.

Summary of Contents for A215-S5837











































































































































































Search results

Summary of Contents for A215-S5837

Reviews:

Related manuals for A215-S5837

Brands by name

Popular brands

Toshiba A215-S5837, User Manual

Search results

Summary of Contents for A215-S5837

Reviews:

Related manuals for A215-S5837

Brands by name

Popular brands