Toshiba 9000 User Manual Download Page 174

Page: 174 / 294

174

Toshiba Utilities

System Setup

System Setup

System Setup is the MS-DOS

-based, Toshiba configuration-

management tool, similar to Hardware Setup available through
Windows. You can access System Setup during startup or from the
Companion Diskette.

HINT: System Setup doesn’t run from within Windows. You
must exit Windows and run System Setup while in MS-DOS
mode.

To access System Setup:

Insert the Toshiba Companion Diskette into the diskette drive.

Restart your computer while pressing the

ESC

key.

This command instructs the computer to start from the
diskette drive.

The message “

Welcome to Toshiba Companion Diskette

” appears

on your screen.

Press

Enter.

The Toshiba Companion Diskette Main Menu displays a list
of options.

Choose Exit to DOS, and press

Enter.

The MS-DOS prompt

A:>

appears.

Type System Setup and press

Enter

Summary of Contents for 9000







































































































































































































































































































Search results

Summary of Contents for 9000

Reviews:

Related manuals for 9000

Brands by name

Popular brands

Toshiba 9000, User Manual

Search results

Summary of Contents for 9000

Reviews:

Related manuals for 9000

Brands by name

Popular brands