Toshiba 9000 User Manual Download Page 129

Page: 129 / 294

129

Exploring Your Options

Exploring audio features

Sound Recorder screen

Click the Record button.

Speak normally into the microphone.

The maximum recording time is 60 seconds.

When you have finished recording, click the Stop button.

To hear what you just recorded, click the Play button.

To save the file, select Save from the File menu.

Adjusting recording quality

The better the quality of the recording, the more disk space the
sound file requires. Experiment to find a balance that fits your
needs.

Open Sound Recorder, if necessary.

Click Start, point to Programs, Accessories,
Entertainment, and then click Sound Recorder.

In the Sound Recorder window, click Edit, then click Audio
Properties.

In the Audio Properties dialog box, adjust the Recording
Volume, Preferred device, and Preferred quality according to
your needs.

Record
Stop
Play
Skip forward
Skip backward

Positioning
bar

Summary of Contents for 9000







































































































































































































































































































Search results

Summary of Contents for 9000

Reviews:

Related manuals for 9000

Brands by name

Popular brands

Toshiba 9000, User Manual

Search results

Summary of Contents for 9000

Reviews:

Related manuals for 9000

Brands by name

Popular brands