Toshiba 9000 User Manual Download Page 123

Page: 123 / 294

123

Power Management

Conserving power

Power usage modes in Windows 2000

In Windows

2000, you can choose from predefined power usage

modes or select your own combination of power management
options. To do this:

Click Start, point to Settings, Control Panel, and click on
the Power Saver icon.

Open the Power Save Modes tab and set your options.

For more information, see

“Power Saver” on page 175

Using a hot key to set the power usage mode

You may use a hot key to set the power usage mode.

To set the power usage mode:

Press

and

simultaneously to display the power usage

pop-up window.

Sample Power usage mode pop-up window

While continuing to press

, press

until you select the

desired power usage mode.

The power usage modes under battery power are:
Long Life, Normal, High Power, DVD-Playback,
Presentation, and Super Long Life.

The power usage mode under AC power is Full Power only

Release the

key.

The pop-up window disappears. You’re now in the selected
mode.

Summary of Contents for 9000







































































































































































































































































































Search results

Summary of Contents for 9000

Reviews:

Related manuals for 9000

Brands by name

Popular brands

Toshiba 9000, User Manual

Search results

Summary of Contents for 9000

Reviews:

Related manuals for 9000

Brands by name

Popular brands