1
English
Switching On
If the RED LED is unlit check that the plug is
connected to the power supply. If the picture
does not appear press on the remote con-
trol, it may take a few moments.
To put the television into Standby press on
the remote control. To view the television press
again. The picture may take a few seconds
to appear.
Using the Remote Control
To set up the television you will now need to
use the on screen menus. Press
MENU
on the
remote control to see the menus.
The on-screen
menu appears as a list of five
topics. As each symbol is selected by pressing
◄ or ► on the navigation ring on the remote
control, its respective options will appear
below.
To use
the options, press ▲ or ▼ on the navi
-
gation ring to move up and down through them
and use
OK
, ◄ or ► to select the required
choice. Follow the on-screen instructions. The
functions of each menu are described in detail
throughout the manual.
For 32/40LV70**
Using the Controls
To change the volume press -
.
To change the channel press
P
.
Press
MENU
and
▲ or ▼, ◄ or ► to control
the sound and picture options.
Press
EXIT
to
finish.
To select an external input, press and then
use
▲ or ▼ to move through the list until
the appropriate input source is selected.
Please always refer to the owner’s manual of
the equipment to be connected for full details.
Please note
: Inserting the headphone plug will
mute the sound from all speakers.
Summary of Contents for 19AV703
Page 1: ...AV 0 LV 0 ANALOGUE Series ...
