Care and service
DE
EN
ADVICE
■
Do not switch off the system during calibration.
■
Depending on the size of the battery bank, very long running times may
result.
Proceed as follows:
1. Charge the battery until it is 100 % charged.
2. Set the state of charge to 100 %, as described in the accelerator lever manual.
3. Start the calibration trip.
4. During the calibration trip, ensure that the battery is sufficiently charged, so that
you can return to the berth or landing stage at any time in order to be able to
discharge the batteries there.
5. Attach the boat to the landing stage or berth.
6. At the landing stage or berth, run the battery until it is flat.
During the last half hour of the calibration trip, the motor's power
consumption must be between 50 and 400 Watt.
The motor switches itself off automatically, and this completes the
calibration.
page 98 / 116
