Toro WORKMAN GTX 07131, Operator'S Manual

Page: 28 / 48

Preparing to Maintain the
Machine
1. Park the machine on a level surface.
2. Engage the parking brake, rotate the key switch to the
O
FF
position, and remove the key.
Lifting the Machine
DANGER
The machine may be unstable when using a jack. It
could slip off the jack, injuring anyone beneath it.
• Do not start the machine while the machine is
on a jack.
• Always remove the key from the key switch
before getting off the machine.
• Block the tires when the machine is supported
by lifting equipment.
• Use jack stands to support the machine once
you have lifted the it.
Important:
Whenever the machine is ran for routine
maintenance and/or diagnostics, the rear wheels of the
machine should be 25 mm (1 inch) off the ground, with
the rear axle supported on jack stands.
•
The lifting point at the front of the machine is at the front
of the frame behind the towing tongue (
Figure 22 ).
Figure 22
1. Front lifting point
•
The lifting point at the rear of the machine is under the
axle tubes (
Figure 23 ).
Figure 23
1. Rear lifting points
28