Toro WORKMAN GTX 07131, Operator'S Manual

Page: 15 / 48

Parking-Brake Lever
The parking-brake lever is located on the control panel
(
Figure 6 ).
Whenever you shut off the machine, engage the parking
brake to prevent the machine from accidental moving. If
the machine is parked on a steep grade, make sure that you
engage the parking brake.
To engage the parking brake, pull the parking-brake lever
toward you (
Figure 7 ).
Figure 7
1. Parking-brake lever
To disengage the parking brake, push down the button on top
of the parking brake lever, pull the parking-brake lever toward
you to release pressure, and then push the parking-brake lever
forward (
Figure 8 ).
Figure 8
1. Parking-brake lever and button
Direction Selector
The direction selector is located to the left of the
parking-brake lever. The direction selector has 3 positions:
F
ORWARD
, R
EVERSE
, and N
EUTRAL
( Figure 6 ).
Note:
The machine can be on in any of the 3 positions, but
only moves in the F
ORWARD
and R
EVERSE
positions.
Important:
Always stop the machine before changing
direction.
Horn Button
TC Models Only
The horn button is located on the control panel ( Figure 6 ).
Press the horn button to sound the horn.
Light Switch
The light switch is located to the left of the steering column
(
Figure 6 ). Use the light switch to illuminate the headlights.
Push the light switch upward to turn on the headlights or
push downward to turn off the lights.
Battery-Discharge Indicator
The battery-discharge indicator is located to the left of the
steering column (
Figure 6 ). The battery-discharge indicator
indicates the remaining charge in the batteries. When the
machine batteries are fully charged, ten indicator bars extend
from the 0 to the 1 position. As the charge is used, the
indicator bars disappear starting at the right side of the
meter. For detailed information on the battery meter, refer to
Understanding and Using the Battery System (page 21) .
Hour Meter
The hour meter is located to the right of the light switch
(
Figure 6 ). Use the hour meter to find out the total number of
operating hours. The hour meter starts to function whenever
you turn the key switch to the O
N
position or if the machine
is running.
Note:
When the machine is running, the hour meter blinks
continuously, recording usage.
USB Power Point
The USB power point is located to the left of the
parking-brake lever (
Figure 6 ). Use the power point to power
mobile devices.
Important:
When not using the USB power point, insert
the rubber plug to prevent damage to the power point.
Key Switch
The key switch ( Figure 6 ), is used to run and shut off the
machine, and has 2 positions: O
N
and O
FF
. Rotate the key
clockwise to the O
N
position to operate the machine. When
the machine is stopped, rotate the key counterclockwise to
the O
FF
position to shut off the machine. Remove the key
from the key switch whenever you leave the machine.
15