Toro TX Platform, Installation Instructions Manual

Page: 9 / 12

Maintenance
Greasing the Platform
Grease all pivot joints every 8 operating hours and
immediately after every washing.
Grease Type: General-purpose grease.
1. Lower the loader arms and stop the engine.
Remove the key.
2. Clean the grease fittings with a rag.
3. Connect a grease gun to each fitting ( Figure 12 ).
g004407
Figure 12
4. Pump grease into the fittings until grease begins
to ooze out (approximately 3 pumps).
5. Wipe up any excess grease.
Checking the Shear Bolt
Check the shear bolt ( Figure 13 ) for wear, cracks, or
damage every 8 operating hours. Replace it if it is
damaged.
Important:
Use only a genuine Toro replacement
shear bolt and nut. Other bolts will not function
correctly and may lead to an unsafe condition.
g004408
Figure 13
1. Shear bolt
9