background image

 

 

1

 

1

EMISSION CONTRO

 

 

 

 

MY VEHICLE IDENTIFICATION NUMBER   

Record the VIN number and Model number of your Kart below for 

service and insurance records. 

The VIN number is hard tagged on the kart frame just behind the driver 

seat. 

VIN:                                                              Model :

L SYSTEM WARRANTY 

YOUR WARRANTY RIGHTS AND OBLIGATIONS 

The emission control system warranty period for this vehicle begins on the date the vehicle is delivered 

to the first purchaser other than an authorized dealer, or the date it is first used as 

a demonstrator, lease, or company vehicle, whichever comes first and continues for 30 months after 

that date, or 5,000km, whichever comes first, provided there has been no abuse, 

neglect or improper maintenance of your vehicle. Where a warrantable condition exists, the Distributor 

will repair your vehicle at no cost to you, including diagnosis, parts and labor. If an emission-related 

part on your vehicle is defective, the part will be repaired or replaced by the Distributor. This is your 

emission control defects warranty. 

OWNER’S WARRANTY RESPONSIBILITIES 

As the vehicle owner, you are responsible for the performance of the required maintenance. You 

should maintain a record of all maintenance performed on your vehicle and retain all receipts covering 

maintenance on your vehicle. You may not be denied a warranty claim solely because of your failure to 

ensure the performance of all scheduled maintenance or lack of maintenance records or receipts. You 

are responsible for presenting your vehicle to an authorized dealer as soon as a problem exists. The 

warranty repairs should be completed in a reasonable amount of time, not to exceed 30 days. 

As the vehicle owner, you should be aware that you may be denied your warranty coverage if your 

vehicle or a part has failed due to abuse, neglect, improper maintenance, or unapproved modifications. 

WARRANTY COVERAGE 

The Distributor warrants that each new 2008 and later vehicle: 

·

 

is designed, built, and equipped so as to conform at the time of initial retail purchase with all 

applicable regulations of the United States Environmental Protection Agency, and the California Air 

Resources Board; and   

·

 

is free from defects in material and workmanship which cause such vehicle to fail to confirm with 

applicable regulations of the United States Environmental Protection Agency or the California Air 

Resources Board for the periods specified above. 

Your emission control system warranty covers components whose failure would increase an engine’s 

emission, including electronic controls, fuel injection system, carburetor, the ignition system, catalytic 

converter, or any other system utilized in this vehicle to control emission if it is originally equipped. Also 

included may be hoses, connectors and other emission-related assemblies. Replacing or repairing 

other components (including parts, labor, and other costs) not covered by this emission control system 

warranty or the standard warranty is the responsibility of the owner. 

Coverage of repairs under this warranty applies only when repairs are completed at an authorized 

Summary of Contents for GK-59





















Reviews: