Toro TX Platform, Installation Instructions Manual, Page: 2 / 12

Safety and Instructional
Decals
Safety decals and instructions are easily visible to the operator and are located near any area
of potential danger. Replace any decal that is damaged or lost.
decal94-3353
94-3353
1. Crushing hazard of hand—keep hands away.
decal58-6520
58-6520
1. Grease
decal112-2744
112-2744
1. Read the Operator’s Manual . 4. Lower the platform from the unlocked position to use.
2. Platform locked in the storage position. 5. Warning—read the Operator’s Manual .
3. Lift the platform up to unlock. 6. Tipping hazard—do not step off the platform with a raised
load.
Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure Description Qty. Use
1
No parts required
–
Prepare the traction unit.
Platform assembly 1
Bolt (1/2 x 1-1/2 inches) 4
2
Flange-head nut (1/2 inch) 4
Install the platform.
Counterweight 1
Bolt (1/2 x 1-1/4 inches) 4
3
Washer 4
Install the counterweight (TX 500 series
traction units only).
4
No parts required
–
Install the decal.
Handle 1
5
Flange-head bolts (5/16 x 3/4 inch) 2
Install the handle.
2