. If the machine ever vibrates abnormally, stop
immediately, turn engine off, wait for all motion to stop
and inspect for damage. Repair all damage before
commencing operation.
Before getting off the seat:
Engage parking brake and lower attachment.
Take precautions to prevent accidental starts,
rolling away, etc.
. Shut engine off and wait for all movement to
stop.
Whenever machine is left unattended, be sure
engine is stopped,
parking brake is engaged,
implement is lowered and key is removed from ignition.
. Before servicing or making adjustments to the
machine, stop the engine and pull the spark plug wire
off spark plug to prevent accidental starting of the
engine.
Make sure all hydraulic line connectors are
tight,and all hydraulic hoses and lines are in good
condition before applying pressure to the system.
Keep body and hands away from pin hole leaks or
nozzles that eject hydraulic fluid under high pressure.
Use paper or cardboard, not hands, to search for
leaks. Hydraulic fluid escaping under pressure can
have sufficient force to penetrate skin and do serious
damage. If fluid is injected into the skin it must be
surgically removed within a few hours by a doctor
familiar with this form of injury or gangrene may result.
Before disconnecting or performing any work on
the hydraulic system, all pressure in system must be
relieved by stopping engine, engaging parking brake
and lowering attachments to the ground.
To make sure entire machine is in good condition,
keep all nuts, bolts and screws properly tightened.
. If major repairs are ever needed or assistance is
required, contact an Authorized TORO Distributor.
. To reduce potential fire hazard, keep the engine
area free of excessive grease, grass, leaves and
accumulation of dirt.
If the engine must be running to perform a
maintenance adjustment, keep hands, feet, clothing,
and any parts of the body away from the engine and
any moving parts. Keep everyone away.
Do not overspeed engine by changing governor
settings. Maximum engine speed is 3200 rpm. To
assure safety and accuracy, have an Authorized Toro
Distributor check maximum engine speed with a
tachometer.
Engine must be shut off before checking oil or
adding oil to the crankcase.
To be sure of optimum performance and safety,
always purchase genuine TORO replacement parts
and accessories. Replacement parts and accessories
made by other manufacturers could be dangerous.
Such use could void the product warranty of The Toro
Company.
This unit has an equivalent continuous AĆweighted
sound pressure at the operator ear of: 82 dB(A), based
on measurements of identical machines per Directive
84/538/EEC and amendments.
This unit has a sound power level of: 93 dB(A)/ pW,
based on measurements of identical machines per
Directive 84/538/EEC and amendments.
!'"+)&
This unit does not exceed a vibration level of 2.5 m/s
@
,
at the hands based on measurements of identical
machines per ISO 5349 procedures.
$(%# ("*
This unit does not exceed a vibration level of 0.5 m/s
@
at the posterior based on measurements of identical
machines per ISO 2631 procedures.
Summary of Contents for Sand Pro 3020
Page 26: ... ...
