" #
,)6 (8(4
(Fig.12) -To raise the implement, pull lever
back; to lower implement, push lever forward. For float
position, move lever into detent position. When the
desired position is attained, release the lever and it will
return to neutral.
,*74(
,)6 /(8(4
$4.,1* %4$.(
+( +$5 $ '27%/($&6,1* /,)6
&:/,1'(4 291 34(5574( &$1 %( $33/,(' 62 6+(
,03/(0(16 )24 &(46$,1 23(4$6,1* &21',6,215
$4.,1* 4$.(
(Fig.12) - To engage parking brake,
pull back on lever. To disengage, push lever forward.
7(/ +76)) !$/8(
(Fig. 13) - Close fuel shut-off
valve when storing machine.
,*74(
7(/ 5+762)) 8$/8(
($6 '-7560(16
Ċ Move lever on side of seat
outward, slide seat to desired position and release
lever to lock seat into position.
Remove foot from traction pedal, make sure pedal
is in neutral position and engage parking brake.
Pull choke lever out to ON position - when starting
a cold engine - and throttle lever to SLOW position.
Insert key into ignition switch and rotate it
clockwise to start the engine. Release key when
engine starts. Regulate the choke to keep engine
running smoothly.
2 34(8(16 28(4+($6,1* 2) 6+( 56$46(4
02624 '2 126 (1*$*( 56$46(4 /21*(4 6+$1
5(&21'5 )6(4 5(&21'5 2) &216,17275 &4$1.,1*
9$,6 5(&21'5 %()24( (1*$*,1* 56$46(4 02624
$*$,1
When engine is started for the first time, or after
overhaul of the engine, operate the machine in forward
and reverse for one to two minutes. Also operate the lift
lever to be sure of proper operation of all parts.
To stop engine, move throttle control to SLOW
position and rotate ignition key to OFF. Remove key
from switch to prevent accidental starting.
+76 (1*,1( 2)) $1' 9$,6 )24 $// 028,1*
3$465 62 5623 %()24( &+(&.,1* )24 2,/ /($.5
/225( 3$465 $1' 26+(4 0$/)71&6,215
Close fuel shut off valve before storing machine.
#
The purpose of the interlock system is to prevent the
engine from cranking or starting unless the traction
pedal is in NEUTRAL".
Check interlock operation in a wide open area free
of debris and bystanders. Stop engine.
Sit on the seat. Depress traction pedal in forward
and reverse directions, while trying to start the engine.
If engine cranks there may be a malfunction in the
interlock system. Repair immediately. If engine does
not crank, system is operating correctly.
Summary of Contents for Sand Pro 3020
Page 26: ... ...
