Toro Multi Pro WM 41240, Operator'S Manual

Page: 72 / 84

Installing the Rate Control
Manifold Valve
1. Align a gasket between the flanges of the rate
control valve manifold and the pressure filter
head (A of
Figure 101 ).
Note:
If needed, loosen the mounting hardware
for the pressure filter head as needed to provide
clearance.
g028538
Figure 101
1. Locknut 5. Gasket 9. Manifold valve
assembly
2. Valve mount 6. Clamp 10. Socket (outlet
fitting)
3. Flange
(agitation
valve) 7. Flange
(pressure filter
head) 11. Retainer
4. Flanged-head
bolt 8. Flange (rate
control valve)
2. Assemble the rate control valve manifold,
gasket, and pressure filter head with a clamp
and tighten by hand (A of
Figure 101 ).
3. Align a gasket between the flanges of the rate
control valve and the agitation valve manifold
(A of
Figure 101 ).
4. Assemble the rate control valve manifold,
gasket, and agitation valve manifold with a
clamp and tighten by hand (A of
Figure 101 ).
5. Assemble the rate control valve to the valve
mount with the 2 flanged-head bolts and 2
flanged locknuts (A of
Figure 101 ) that you
removed in step 3 of Removing the Rate Control
Manifold Valve (page 67) and torque the nut and
bolt to 1017 to 1243 N-cm (90 to 110 in-lb).
6. Assemble the outlet fitting onto the lower endcap
fitting of the manifold valve (B of
Figure 101 ).
7. Secure the endcap fitting to the outlet fitting by
inserting a retainer into the socket of the outlet
fitting (B of
Figure 101 ).
8. If you loosened the mounting hardware for the
pressure filter head, tighten the nut and bolt to
1978 to 2542 N-cm (175 to 225 in-lb).
Installing the Agitation Manifold
Valve
1. Align the flange of the agitation valve manifold,
a gasket, and the flange of the agitation bypass
valve (A of
Figure 102 ).
Note:
If needed, loosen the mounting hardware
for the master boom valve as needed to provide
clearance.
72