Toro Multi Pro WM 41240, Operator'S Manual

Page: 28 / 84

Note:
Ensure that the turrets for the sprayer
nozzles are facing rearward.
4. Assemble hinge plate to the triangular plate
using 4 flanged-head bolts, 4 backing plates,
and 4 flanged locknuts, that you removed in step
1 , as shown in Figure 30 .
5. Torque the nuts bolts and nuts to 37 to 45 N-m
(27 to 33 ft-lb).
6. Align the rod end of the boom lift cylinder with
the holes in the horn of the pivot bracket (
Figure
30 ).
g028738
Figure 31
1. Rod end (boom lift
cylinder)) 3. Clevis pin (5/8 x 4-3/4
inch)
2. Horn (pivot bracket) 4. Hairpin
7. Secure the rod end to the pivot bracket with a
clevis pin and a hairpin (
Figure 30 ).
8. Repeat step 1 through 5 on the other side of the
center-boom assembly with the opposing boom
section.
Note:
Before you finish this procedure, ensure
that all of turrets for the spray nozzles are facing
rearward.
28