Toro Multi Pro WM 41240, Operator'S Manual

Page: 32 / 84

4. Thread the jam nut (3/8 inch) into the bolt (3/8 x
1 inch); refer to
Figure 35 .
5. Thread the bolt and jam nut into the weld nut
at the bottom of the tank support channel and
tighten the bolt and jam nut (
Figure 35 ).
Installing the Tank
Note:
The fresh-water tank cannot be installed on a
2 post ROPS.
1. Align the holes in the mount for the fresh-water
tank with the holes in the support tube (
Figure
36 ).
g028473
Figure 36
1. Support tube 4. Washer (5/16 inch)
2. Flanged locknut (5/16
inch) 5. Flanged-head bolt (5/16 x
2-1/4 inch)
3. Mount (fresh-water tank)
2. Secure the mount to the tube ( Figure 36 ) with 2
flanged-head bolts (5/16 x 2-1/4 inch), 2 washers
(5/16 inch), and 2 flanged locknuts (5/16 inch).
3. Torque the bolts and nuts to 1978 to 2542 N-cm
(175 to 225 in-lb).
4. Apply medium-grade thread-locking compound
to the 4 flanged-head bolt (5/16 x 5/8 inch).
5. Align the threaded inserts in the fresh water tank
with the holes in the fresh-water tank mount
(
Figure 37 ).
g028474
Figure 37
1. Flanged-head bolt (5/16 x
5/8 inch) 3. Threaded insert
(fresh-water tank)
2. Hole (fresh-water tank
mount)
6. Secure the fresh-water tank to the mount ( Figure
37 ) with 4 flanged-head bolt (5/16 x 5/8 inch).
7. Torque the bolts and nuts to 1978 to 2542 N-cm
(175 to 225 in-lb).
32