g028531
Figure 76
1.
Agitation bypass valve
2.
Master boom bypass
12.
Press the
PUMP
switch to the Off position, shift
the throttle lever to the Idle position, and turn
the
IGNITION
switch Off.
Adjusting the Master Boom
Bypass Valve
Note:
Adjusting the master boom bypass valve
reduces or increases the amount of flow sent to the
agitation nozzles in the tank when the
MASTER BOOM
switch is set to the Off position.
1.
Ensure that the sprayer tank is filled with water.
2.
Set the parking brake.
3.
Set the transmission as follows:
•
For HD-Series Models with a
manual
transmission
—shift the transmission to
Neutral
•
For the
HDX-Auto model
—shift the
transmission to P (park).
4.
Set the
PUMP
switch to the On position.
5.
Set the
AGITATION
switch to the On position.
6.
Set the
MASTER BOOM
switch to the Off position.
7.
Set the engine speed as follows:
•
For machines
without
the optional throttle
lock—have 1 person press down on the
accelerator pedal until maximum engine
speed is reached.
Note:
The other person will collect samples
from the sprayer nozzles.
•
For machines
with
the optional throttle
lock, press down on the accelerator pedal
until maximum engine speed is reached
and set the throttle lock; refer to operation
instructions for your Workman hand throttle
kit.
8.
Adjust the master boom bypass handle to
control the amount of agitation occurring in the
tank (
).
9.
Reduce the throttle speed to idle.
10.
Set the
AGITATION
switch and
PUMP
switch to the
Off position.
11.
Shut off the machine.
57
Summary of Contents for Multi Pro WM 41240
Page 79: ...Schematics g255886 Flow Diagram Sprayer System DWG 125 0699 Rev B 79...
Page 80: ...Notes...
Page 81: ...Notes...
Page 82: ...Notes...
