117–3626
1.
Warning—read the
Operator’s Manual.
5.
Thrown object hazard—keep bystanders a safe distance from
the machine.
2.
Warning—do not operate this machine unless you are trained.
6.
Warning—engage the parking brake, stop the engine
and remove the spark plug wire before performing any
maintenance on the machine.
3.
Thrown object hazard—keep deflector in place.
7.
Warning—engage the parking brake and stop the engine
before leaving the machine.
4.
Cutting, dismemberment hazard of hand or foot—stay away
from moving parts and keep all guards and shields in place.
8.
Sliding and loss of control hazard—do not operate the
machine near drop-offs or water; keep a safe distance from
drop-offs.
Product Overview
Figure 3
1.
Side discharge chute
7.
Control levers
2.
Battery
8.
Operator’s Manual
tube
3.
Engine
9.
Platform (down position)
4.
Fuel shut-off valve
10.
Hydraulic tank
5.
Fuel tank
11.
Mower deck
6.
Controls
12.
Front caster wheel
Controls
Become familiar with all the controls (Figure 4) before
you start the engine and operate the machine.
Figure 4
1.
Parking brake lever
8.
Height-of-cut lever
2.
Choke
9.
Fuel cap
3.
Ignition switch
10.
Height-of-cut pin
4.
Fuel guage
11.
Platform latch
5.
Speed control lever
12.
Right motion control lever
6.
Blade control switch (PTO) 13.
Left motion control lever
7.
Throttle control
Hour Meter
The hour meter records the number of hours the engine
has operated. It operates when the engine is running.
Use these times for scheduling regular maintenance
(Figure 5).
Fuel Gauge
The fuel gauge is located on the top left side of the tank
(Figure 4).
11
Summary of Contents for GrandStand 74567TE
