G008948
1
2
Figure 14
1.
On
2.
Off
Starting and Stopping the
Engine
Starting the Engine
1. Connect the wires to the spark plugs.
2. Open the fuel valve.
3. Move the right motion control lever to neutral
locked position.
4. Set the parking brake; refer to Setting the Parking
Brake.
5. Move the blade control switch (PTO) to the
Off
position.
6. Move the throttle lever midway between the
Slow
and
Fast
positions.
Note:
A warm or hot engine may not require
choking.
Figure 15
7. Turn the ignition key to the Start position
(Figure 12). When the engines starts, release the key.
Important:
Do not engage starter for more
than 5 seconds at a time. If the engine fails
to start allow a 15 second cool-down period
between attempts. Failure to follow these
instructions can burn out the starter motor.
Note:
Additional starting cycles may be required
when starting the engine for the first time after the
fuel system has been without fuel completely.
ST
ART
RUN
ST
OP
G008947
Figure 16
1.
Off
3.
Start
2.
Run
17
Summary of Contents for GrandStand 74567TE
