Figure 33
1.
Remove battery
2.
With two people, lift the
front end of the mower
(ensure the platform is up)
Remove the Cushion for Rear
Access
The cushion can be removed for rear access to the
machine for maintenance or adjustment.
1. Lower the platform.
2. Remove the cotter pins on each side of the cushion.
3. Slide the cushion to the side to remove it from the
pins and plastic bushings on both sides.
4. Lower the cushion to the platform.
5. Perform any maintenance or adjustment on the
machine.
6. Install the plastic bushings onto the pins (Figure 34).
7. Raise the cushion and slide it onto the pins on both
sides of the machine.
8. Slide the plastic bushings into the cushion bracket
and secure them with a cotter pin (Figure 34).
Figure 34
1.
Pin
3.
Cotter pin
2.
Cushion bracket
4.
Plastic bushing
28
Summary of Contents for GrandStand 74567TE
