Figure 19
1.
Platform up
3.
Pull the knob out to lower
the platform
2.
Platform down
Driving Forward or Backward
The throttle control regulates the engine speed as
measured in rpm (revolutions per minute). Place
the throttle control in the fast position for best
performance. Always operate in the full throttle
position when mowing.
Machine can spin very rapidly. Operator may
lose control of machine and cause personal
injury or damage to machine.
Slow the machine down before making sharp
turns.
Driving Forward
1. Release the parking brake; refer to Releasing the
Parking Brake in Operation.
2. Move the right side motion control lever to the
center, un-locked position.
Figure 20
1.
Front reference bar
4.
Right control lever
2.
Left control lever
5.
Right control lever in the
neutral lock position
3.
Rear reference bar
3. To go forward, move the speed control lever to the
desired speed.
4. Slowly push the motion control levers forward
(Figure 21).
Note:
The engine will kill if the right hand control
lever is moved with the parking brake engaged.
The farther you move the traction control levers in
either direction, the faster the machine will move in
that direction.
To stop, pull the motion control levers back to the
neutral position.
20
Summary of Contents for GrandStand 74567TE
