g214240
Figure 51
Mesh size—application rate
1.
Higher application rate
3.
Screen mesh size
2.
Lower application rate
Selecting a Nozzle-Tip Filter
(Optional)
Note:
The use the optional nozzle-tip filter to protect
the spray-nozzle tip and increase its service life.
Use the nozzle-tip filter table to identify the screen
mesh for the spray nozzles you are using based
on chemicals products or solutions with a viscosity
equivalent to water.
Nozzle-Tip Filter Table
Spray Nozzle
Color Code (flow
rate)
Filter Mesh Size*
Filter Color Code
Yellow (0.2 gpm)
100
Green
Red (0.4 gpm)
50
Blue
Brown (0.5 gpm)
50
Blue
Gray (0.6 gpm)
50
Blue
White (0.8 gpm)
50
Blue
Blue (1.0 gpm)
50
Blue
Green (1.5 gpm)
50
Blue
*The mesh size of the nozzle filters in this table
are based on spray chemicals or solutions with the
viscosity equivalent to water.
Important:
When you spray with higher viscosity
(thicker) chemical products or solutions with
wettable powders, you may need to use a coarser
screen mesh for the optional tip-filter; refer to
.
g214245
Figure 52
Mesh size—chemical or solution viscosity
1.
Higher-viscosity chemicals
or solutions
3.
Screen mesh size
2.
Lower-viscosity chemicals
or solutions
When you spray at a higher application rate, consider
using an courser tip-filter mesh; refer to
g214245
Figure 53
Mesh size—application rate
1.
Higher application rate
3.
Screen mesh size
2.
Lower application rate
44
Summary of Contents for 41393
Page 88: ...Schematics g034336 Sprayer System Schematic Rev DWG 131 9559 Rev A 88...
Page 89: ...Notes...
Page 90: ...Notes...
