g191302
Figure 105
1.
Manifold (agitation valve)
4.
Flange-head bolt (1/4 x
3/4 inch)
2.
Valve support
5.
Gasket
3.
Flange locknut (1/4 inch)
4.
Remove the agitation-valve manifold and
gaskets from the machine (
).
Note:
If needed, loosen the mounting hardware
for the pressure-filter head as needed to provide
clearance.
Note:
Retain the flange clamps, gaskets and
quick-connect pins for installation in
the Agitation-Manifold Valve (page 81)
.
Removing the Section-Manifold
Valve
1.
Remove the quick-connect pin that secures the
quick-connect coupler for the section-bypass
valve to the section-manifold valve (
).
g191303
Figure 106
1.
Section-bypass valve
3.
Quick-connect coupler
(section supply hose)
2.
Quick-connect pins
4.
Quick-connect fitting
(agitation valve manifold)
2.
Remove the quick connect pin that secures the
quick-connect coupler for the section supply
hose to the manifold for the quick-connect fitting
of the section-manifold valve (
).
3.
Remove the 2 flange clamps that secure the
section-manifold valve to the flanges of the
adjacent components (
).
77
Summary of Contents for 41393
Page 88: ...Schematics g034336 Sprayer System Schematic Rev DWG 131 9559 Rev A 88...
Page 89: ...Notes...
Page 90: ...Notes...
