1.00 Installation guide
1.01 On delivery
Before opening crates
1. Check the number of crates delivered agrees with the number on the shipping documents.
2. Inspect the crates for damage. If any damage is visible note the crate number, and the position and
extent of the damage. If the crates are not to be opened immediately, the shipping company should be
notified as soon as possible. If the crates are to be opened at this time, wait until the product is inspected
for damage.
3. The crates should be moved to a position close to the operating area before opening.
4. The crates should be opened carefully, the contents removed and the quantities checked against the
shipping notes. A product identification chart can be found at Appendix A. If any damage was noted on
the outside of the crates, the product next to the damage should be inspected carefully. Any damage
should be notified to the shipping company as soon as the product is unpacked. Any shortage should be
notified to Tornado International Ltd. in writing (letter, fax or e-mail) as soon as possible and in any event
not later than 5 days after receipt.
Before installation
All equipment designed to operate off mains voltage supply (100V to 240V) is supplied with a connecting
plug where available. Ensure that the required number of plugs and sockets are available before starting
the installation.
Caution!
Check that the supply voltage matches the voltage setting on the front of the PSU and charger cases. (see
1.04 Dia 1 and 1.05 Dia 1)
Tools & items required;
(These are not supplied with the unit)
Small flat screwdriver
Medium flat screwdriver
Medium cross point screwdriver
Power drill
8mm drill bit
51mm hole cutter
10mm socket and ratchet
Socket set or adjustable spanner
Staple gun or 3mm cable clips
7mm cable clips
10 of each coin/token/currency note used
©Tornado International Ltd. 2019
-5-
Confidential
1N00-510 Genesis Boat User Manual v3 05/19
