©Tornado International Ltd. 2019
-18-
Confidential
The master console can be identified by the provision of an additional door to the right of the coin acceptor
door. It is usually console number 5/6. This door allows access to the transmitter motherboard.
Attached to the transmitter motherboard are the following components;
The transmitter
The loop output board (if a loop system system is specified)
The master timer
Console motherboard connection
Dummy plugs (on any setup with fewer than 12 positions)
To access the components on the transmitter motherboard, remove the magnetically attached lid by pulling
it away from the main assembly and removing through the cash door.
The consoles are provided with covers, which should be used over night and if it rains heavily during the
day. A canopy over the consoles is advised to allow your customers to use the attraction during inclement
weather or provide shade if the equipment is sited in sunny climates.
The coin acceptor doors and the transmitter access door are all fitted with radial pin tumbler locks. They all
open with the same key. Provision is made for the use of your own padlock to secure the cash box if
required.
Dia 2 - Transmitter motherboard
1N00-510 Genesis Boat User Manual v3 05/19
