62 - EN
4.9.3
Menu 7: Adjusting the light phases
1. Select menu item "7".
ð
After approximately 2 seconds, the display flashes and the set value for
light time appears. The factory setting is "0".
2. If desired, adjust the setting with the aid of the OPEN (B) and CLOSE (C) but-
tons.
Value
Light time
Warning time
Flashing function
0
60 s
0 s
no
1
120 s
0 s
no
2
240 s
0 s
no
3
0 s
0 s
yes
4
0 s
3 s
no
5
0 s
0 s
no
6
0 s
3 s
yes
7
90 s
3 s
no
8
90 s
3 s
yes
9
0 s
8 s
yes
Remarks:
If a warning time is set, the light relay K is energised prior to the drive starting up and during opening
and closing.
WARNING Use a self-flashing signal light.
3. Press the programming button (PROG button) (D).
ð
The display shows "8".
