54 - EN
No.
Terminal
Description
1
Overview of terminal assignment at the drive head
1
J
Plug base for radio receiver
2
E
Connector for antenna. When using an external antenna, the shield must be
placed on the left adjacent terminal (F).
3
F
Connector for external pulse generator (accessories, e.g. key switch or code
keypad)
4
G
Connection for wicket door contact (accessory) or emergency stop. The drive
is stopped or the start-up is suppressed via this input. (see also chapter
Special settings, menu H: STOP-A settings)
5
G / H
Connection for photoelectric sensor LS2 (please refer to the connection
points of the photoelectric sensor manual for use of other photoelectric
sensors)
6
I / H
Connection for 4-wire photoelectric sensor (e.g. LS5). This input activates the
automatic reversal of the drive during closing.
7
I
Connection for e.g. 24 V signal light (accessory). Power supply 24 V DC,
max. 100 mA (switched)
Caution!
Do not connect a push button!
8
K
Connection for external, protectively insulated lighting or signal lamp
(protection class II, max. 500 W) (accessory)
9
F / I
Power supply 24 V DC max. 100 mA (permanent)
10
P
Connection for Mobility Module (accessory)
11
L
Connection for staircase control device, potential-free relay contact,
250 V AC / 5 A
12
M
Status message door OPEN
Connection for traffic light control, potential-free relay contact 120 V AC /
0.5 A or 24 V DC / 1 A
13
N
Status message door CLOSED
Connection for traffic light control, potential-free relay contact 120 V AC /
0.5 A or 24 V DC / 1 A
14
O
Input for optical closing edge safety device OSE or electrical contact strip 8k2
4.6.2
Pulse generator and external safety devices
In situations of increased requirements in terms of personal protec-
tion, we recommend, in addition to the internal power limitation of
the drive, the installation of a 2-wire photoelectric sensor. The in-
stallation of a 4-wire photoelectric sensor serves purely for the pro-
tection of property. For further information on our range of ac-
cessories, please refer to our sales literature or consult your spe-
cialist dealer.
NOTICE
Before using the drive for the first time, test it to make sure that it is
working properly and safely (see chapter Maintenance / Checks)
