Cold Metals Lab
V1.0 11/7/2017
ATC Menu
Insert Number Box - Assigning a tool being inserted into the 3 o'clock position in the ATC
Delete All - Deletes all saved saved tools in the digital ATC (careful as path pilot no longer knows where
tools are stored
Delete - Deletes just the tool in the 3 o'clock position from the digital ATC, or current tool in spindle
from software.
Tray Rev/Tray FWD - Turns the ATC clockwise/CCW so you can load the forks.
Go to tray load position - Moves the spindle head out of way and ATC under the spindle, opening the
ATC gate.
Retract - Moves the spindle head up, and ATC to the home position, Closing the ATC Gate
Draw Bar On/Off - Opens the drawbar. (careful if a tool is loaded it will drop)
Blast- Shoots air down the collet
Ref Tool Tray - References the ATC turned position upon initiation after start up
SET TC Pos - Used for calibrating the ATC rotation position
--/++ - Used in calibration of the ATC
rotation position
